(r54) LCS2016_045a < P1076

P1076 Web>VHDL2017>LCS2016_045a (revision 54) (raw view)~~EditAttach~~
<sticky><!--
   * Local SB = <sticky><b>
   * Local BS = </b></sticky>
--></sticky>

---+!! Language Change Specification for Interface Construct and Port Mode Configurations Proposal
---++!! Primary LCS:

This LCS details the minimum support required for a mode view interface construct at the RTL.

| %SB%LCS Number:%BS%  | LCS-2016-045a |
| %SB%Version:%BS%  | 6 |
| %SB%Date:%BS%  | 2017-Mar-30 |
| %SB%Status:%BS%  | Voting |
| %SB%Author:%BS%  | [[Main.JimLewis][Jim Lewis]], [[Main.PatrickLehmann][Patrick Lehmann]], [[Main.LievenLemiengre][Lieven Lemiengre]] |
| %SB%Source Doc:%BS%  | [[InterfaceConstructandPortModeConfigurations#Analysis][Interface Construct and Port Mode Configurations]] %BR% \
[[UCComplexRTLSignalCPUInterface][Use Case - Complex RTL Signal CPU Interface]] |
| %SB%History Doc:%BS%  | [[LCS2016_045a_History][History]] |
| %SB%Summary:%BS%  | Provide the independent interface mode control for the elements of composite type objects |
| %SB%Related LCS:%BS% | [[TopLCS2016_045b][LCS-2016-045b]] %BR% \
[[LCS2016_045c][LCS-2016-045c]] |


<noautolink>
<sticky>


---++ Format Key
   * LRM text is shown between single quotes %BLACK%'... P1076 LRM quoted text ...'%ENDCOLOR%
   * Existing LRM text is shown in %BLACK%<b>BLACK</b> coloured font%ENDCOLOR%
   * Additional LRM text is shown in %RED%<b>RED</b> coloured font%ENDCOLOR%
   * Deleted LRM text is shown in %RED%<strike><b>RED</b> with strike-through</strike>%ENDCOLOR%
   * In order to try and emphasize text in italic font:
      * Italic font in existing LRM text is shown in %GRAY%<i><b>GRAY</b> italic font</i>%BLACK%
      * Italic font in new LRM text is shown in %ORANGE%<i><b>ORANGE</b> italic font</i>%ENDCOLOR%
      * Italic font in deleted LRM text is shown in %ORANGE%<strike><i><b>ORANGE</b> with strike-through</i></strike>%ENDCOLOR%
   * Editing instructions (and informative annotations) are shown in %GREEN%<b>GREEN</b> coloured font%ENDCOLOR%

---++ LCS Intent
Add mode *view* construct which will enable the individual mode control 
of the elements of interface objects of a composite type.
   
---++ Details of Language Change:

---+++ 3.2.3 Entity declarative part
---++++ Edit 45a.1
<pre>%BLACK%
entity_declarative_item ::=
   %GREEN%[beginning items unchanged]%ENDCOLOR%
   | type_declaration
   | subtype_declaration
%RED%   | mode_view_declaration%ENDCOLOR%
   | constant_declaration
   %GREEN%[remaining items unchanged]%ENDCOLOR%
</pre>

---+++ 3.3.2 Architecture declarative part
---++++ Edit 45a.2
<pre>%BLACK%
block_declarative_item ::=
   %GREEN%[beginning items unchanged]%ENDCOLOR%
   | type_declaration
   | subtype_declaration
%RED%   | mode_view_declaration%ENDCOLOR%
   | constant_declaration
   %GREEN%[remaining items unchanged]%ENDCOLOR%
</pre>


---+++ 4.7 Package declarations
---++++ Edit 45a.3
<pre>%BLACK%
package_declarative_item ::=
   %GREEN%[beginning items unchanged]%ENDCOLOR%
   | type_declaration
   | subtype_declaration
%RED%   | mode_view_declaration%ENDCOLOR%
   | constant_declaration
   %GREEN%[remaining items unchanged]%ENDCOLOR%
</pre>


---+++ 6.3 Subtype declarations
---++++ Edit 45a.4
%GREEN%[...]%ENDCOLOR%

A subtype indication defines a subtype of the base type of the type mark.

%RED%A subtype that has a resolution indication is called a <i>resolved subtype</i>.
A type or subtype that does not have a resolution indication is called an
<i>unresolved type</i> or <i>unresolved subtype</i> respectively.%ENDCOLOR%

A resolution indication is said to correspond to a subtype, and associates one or more resolution functions
with the subtype to which it corresponds or with subelement subtypes of the subtype to which it
corresponds.%GREEN%[...]%ENDCOLOR%


---+++ 6.5.2 Interface object declarations
---++++ Edit 45a.5
%GREEN%[...]%ENDCOLOR%

<pre>%BLACK%
interface_object_declaration ::=
    interface_constant_declaration
  | interface_signal_declaration
  | interface_variable_declaration
  | interface_file_declaration

interface_constant_declaration ::=
  [ <b>constant</b> ] identifier_list : [ <b>in</b> ] subtype_indication [ := %GRAY%<i>static_</i>%ENDCOLOR%expression ]

interface_signal_declaration ::=
  [ <b>signal</b> ] identifier_list : %RED%<strike>[ mode ] subtype_indication [ <b>bus</b> ] [ := %ORANGE%<i>static_</i>%ENDCOLOR%expression ]</strike> %ORANGE%<i>signal_</i>%ENDCOLOR%mode_indication%ENDCOLOR%

interface_variable_declaration ::=
  [ <b>variable</b> ] identifier_list : [ mode ] subtype_indication [ := %GRAY%<i>static_</i>%ENDCOLOR%expression ]

interface_file_declaration ::=
   <b>file</b> identifier_list : subtype_indication

%RED%mode_indication ::=
    simple_mode_indication
  | mode_view_indication%ENDCOLOR%

%RED%simple_mode_indication ::=
    [ mode ] subtype_indication [ <b>bus</b> ] [ := %ORANGE%<i>static_</i>%ENDCOLOR%expression ]

mode ::= <b>in</b> | <b>out</b> | <b>inout</b> | <b>buffer</b> | <b>linkage</b>
  
mode_view_indication ::=
    record_mode_view_indication
  | array_mode_view_indication

record_mode_view_indication ::=
    <b>view</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name [ <b>of</b> %ORANGE%<i>unresolved_record_</i>%ENDCOLOR%subtype_indication ]
    
array_mode_view_indication ::=
    <b>view (</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name <b>) of</b> %ORANGE%<i>unresolved_array_</i>%ENDCOLOR%subtype_indication

mode_view_declaration ::=
  <b>view</b> identifier <b>of</b> %ORANGE%<i>unresolved_record_</i>%ENDCOLOR%subtype_indication <b>is</b>
    { mode_view_element_definition }
  <b>end</b> <b>view</b> [ %ORANGE%<i>mode_view_</i>%ENDCOLOR%simple_name ] ;

mode_view_element_definition ::=
  record_element_list : element_mode_indication ;

record_element_list ::=
  %ORANGE%<i>record_element_</i>%ENDCOLOR%simple_name { , %ORANGE%<i>record_element_</i>%ENDCOLOR%simple_name }
     
element_mode_indication ::=
    mode  
  | element_mode_view_indication

element_mode_view_indication ::=
    element_record_mode_view_indication
  | element_array_mode_view_indication
	
element_record_mode_view_indication ::=
    <b>view</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name
    
element_array_mode_view_indication ::=
    <b>view (</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name <b>)</b>%ENDCOLOR%
</pre>


---++++ Edit 45a.6
%RED%<del>If no mode is explicitly given in an interface declaration other than an interface file declaration, mode in is assumed.</del>%ENDCOLOR%

---++++ Edit 45a.7
%GREEN%[replacement]%ENDCOLOR% %BR%
%RED%For an interface constant declaration, if mode <b>in</b> is not explicitly given, mode <b>in</b> is assumed.
For an interface variable declaration, if no mode is explicitly given, mode <b>in</b> is assumed.
For an interface signal declaration, if an mode indication is a simple mode indication and no mode is explicitly given, mode <b>in</b> is assumed.%ENDCOLOR%

---++++ Edit 45a.8
%GREEN%[page 74; 1st paragraph; no edits]%ENDCOLOR% %BR%
For an interface constant declaration (other than a formal parameter of the predefined = or /= operator for an
access type) or an interface signal declaration, the subtype indication shall define a subtype that is neither a
file type, an access type, nor a protected type. Moreover, the subtype indication shall not denote a composite
type with a subelement that is of an access type.

---++++ Edit 45a.9
%GREEN%[2nd paragraph; no edits]%ENDCOLOR% %BR%
For an interface file declaration, it is an error if the subtype indication does not denote a subtype of a file
type.

---++++ Edit 45a.10
%GREEN%[3rd paragraph]%ENDCOLOR% %BR%
If %RED%the simple mode indication of%ENDCOLOR% an interface signal declaration 
includes the reserved word *bus*, then the signal declared by that 
interface declaration is a guarded signal of signal kind *bus*.

---++++ Edit 45a.11
%GREEN%[4rd paragraph with edits]%ENDCOLOR% %BR%
If an interface %RED%constant or variable%ENDCOLOR% declaration 
%RED%or the simple mode indication of an interface signal declaration%ENDCOLOR% 
contains a ":=" symbol followed by an expression, the expression is said 
to be the _default expression_ of the interface object. 
The type of a default expression shall be that of the corresponding interface object. 
It is an error if a default expression appears in an interface declaration 
%RED%or a simple mode indication of an interface signal declaration%ENDCOLOR% and any of the following conditions hold:%BR%
   * icon:line_lr The mode is linkage.%BR%
   * icon:line_lr The interface object is a formal signal parameter.%BR%
   * icon:line_lr The interface object is a formal variable parameter of mode other than in.%BR%
   * icon:line_lr The subtype indication of the interface declaration denotes a protected type.%BR%

---++++ Edit 45a.12
%GREEN%[5th paragraph; no edits]%ENDCOLOR% %BR%
In an interface signal declaration appearing in a port list, the default expression defines the default value(s)
associated with the interface signal or its subelements. In the absence of a default expression, an implicit
default value is assumed for the signal or for each scalar subelement, as defined for signal declarations (see
6.4.2.3). The value, whether implicitly or explicitly provided, is used to determine the initial contents of
drivers, if any, of the interface signal as specified for signal declarations.

---++++ Edit 45a.13
%GREEN%[new paragraphs]%ENDCOLOR% %BR%
%RED%In an interface signal declaration, a mode view indication allows each 
subelement of the composite to have a different interface mode.
For an interface signal declaration with a mode view indication there 
is an equivalent interface signal declaration for each subelement
of the composite whose mode corresponds to the mode specified 
in the mode view indication and whose type or subtype corresponds
to the type or subtype defined in the composite.%ENDCOLOR%

---++++ Edit 45a.14
%RED%For an array mode view indication or an element array mode view indication, the mode view applies to each element
of the type or subtype specified in the subtype indication.%ENDCOLOR%

---++++ Edit 45a.15
%RED%For a record mode view indication:%ENDCOLOR%
   * icon:line_lr %RED%If the optional subtype indication is not present, 
                  an implicit subtype indication is determined from the corresponding mode view declaration.%ENDCOLOR%
   * icon:line_lr %RED%If the optional subtype indication is present,
                  it specifies the subtype of the interface signal declaration and it shall be compatible with
                  the type or subtype in the corresponding mode view declaration.%ENDCOLOR%

---++++ Edit 45a.16
%RED%For an array mode view indication the type or subtype of the mode view shall be compatible with the
element type or subtype of the subtype indication.%ENDCOLOR%

---++++ Edit 45a.17
%RED%For an element mode view indication, the type or subtype is determined from the corresponding
record element.
For an element array mode view indication, the element type or subtype of each corresponding record element
shall be compatible with the type or subtype of the mode view. 
For an element record mode view indication, the type or subtype of each corresponding record element
shall be compatible with the type or subtype of the mode view.%ENDCOLOR%

---++++ Edit 45a.18
%RED%A mode view declaration declares a <i>mode view</i> for a composite type or subtype.
A mode view specifies a mode for each subelement of a composite type or subtype.
Mode views may be used in an interface signal declaration or within another mode view declaration.%ENDCOLOR%

---++++ Edit 45a.19
%RED%In a mode view declaration, it is an error if either a resolution function 
appears in the subtype indication or the subtype is a resolved subtype.   
However, the elements of a composite may be resolved subtypes.%ENDCOLOR%

---++++ Edit 45a.20
%RED%The subtype indication of a mode view declaration shall denote an unresolved record type or subtype.
For each record element simple name of the type or subtype, 
there shall be a record element simple name in the mode view 
declaration with the same simple name.%ENDCOLOR%

---++++ Edit 45a.21
%RED%It is an error if the mode of an element mode indication is linkage.%ENDCOLOR%


%GREEN%[no edits]%ENDCOLOR% %BR%
In an interface signal declaration appearing in a port list, the default expression defines the default value(s)
associated with the interface signal or its subelements. In the absence of a default expression, an implicit
default value is assumed for the signal or for each scalar subelement, as defined for signal declarations (see
6.4.2.3). The value, whether implicitly or explicitly provided, is used to determine the initial contents of
drivers, if any, of the interface signal as specified for signal declarations.


---++++ Edit 45a.22
%GREEN%[Edit: 3rd paragraph on page 75]%ENDCOLOR% %BR%
%RED%<strike>An interface object has one of the following modes:</strike>%ENDCOLOR%

%RED% The mode or mode view of an interface signal has one of the following modes:%ENDCOLOR%


---+++ 7.2 Attribute specification
---++++ Edit 45a.23
%GREEN%[Add view to the end of the production for entity_class on page 95 middle]%ENDCOLOR%

<pre>%BLACK%
entity_class ::=
  %GREEN%[all unspecified items are unchanged]%ENDCOLOR%
  | <b>sequence</b>
  %RED%| <b>view</b>%BLACK%
</pre>


---+++ LRM 15.10 Reserved words
---++++ Edit 45a.24
%GREEN%[Add view to reserved word list on page 236 in alphabetical order]%ENDCOLOR%

%RED%<b>view</b>%ENDCOLOR%


---+++ Annex C Syntax summary  
%GREEN%[Update the following production rules in alphabetical order.]%ENDCOLOR%

---++++ Edit 45a.25
<pre>%BLACK%
%RED%array_mode_view_indication ::=
    <b>view (</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name <b>)</b> [ <b>of</b> %ORANGE%<i>unresolved_array_</i>%ENDCOLOR%subtype_indication ]%ENDCOLOR%

block_declarative_item ::=
   %GREEN%[beginning items unchanged]%ENDCOLOR%
   | type_declaration
   | subtype_declaration
%RED%   | mode_view_declaration%ENDCOLOR%
   | constant_declaration
   %GREEN%[remaining items unchanged]%ENDCOLOR%

%RED%element_mode_indication ::=
    mode  
  | <i>element</i>_mode_view_indication%ENDCOLOR%

entity_declarative_item ::=
   %GREEN%[beginning items unchanged]%ENDCOLOR%
   | type_declaration
   | subtype_declaration
%RED%   | mode_view_declaration%ENDCOLOR%
   | constant_declaration
   %GREEN%[remaining items unchanged]%ENDCOLOR%

%RED%element_array_mode_view_indication ::=
    <b>view (</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name <b>)</b>%ENDCOLOR%
		
%RED%element_mode_indication ::=
    mode  
  | element_mode_view_indication%ENDCOLOR%

%RED%element_mode_view_indication ::=
    element_record_mode_view_indication
  | element_array_mode_view_indication%ENDCOLOR%
	
%RED%element_record_mode_view_indication ::=
    <b>view</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name%ENDCOLOR%

interface_signal_declaration ::=
  [ <b>signal</b> ] identifier_list : %RED%<strike>[ mode ] subtype_indication [ <b>bus</b> ] [ := %ORANGE%<i>static_</i>%ENDCOLOR%expression ]</strike> %ORANGE%<i>signal_</i>%ENDCOLOR%mode_indication%ENDCOLOR%

%RED%mode_indication ::=
    simple_mode_indication
  | mode_view_indication%ENDCOLOR%

%RED%mode_view_declaration ::=
  <b>view</b> identifier <b>of</b> %ORANGE%<i>unresolved_record_</i>%ENDCOLOR%subtype_indication <b>is</b>
    { mode_view_element_definition }
  <b>end</b> <b>view</b> [ %ORANGE%<i>mode_view_</i>%ENDCOLOR%simple_name ] ;%ENDCOLOR%

%RED%mode_view_element_definition ::=
  record_element_list : element_mode_indication ;%ENDCOLOR%

%RED%mode_view_indication ::=
    record_mode_view_indication
  | array_mode_view_indication%ENDCOLOR%

package_declarative_item ::=
   %GREEN%[beginning items unchanged]%ENDCOLOR%
   | type_declaration
   | subtype_declaration
%RED%   | mode_view_declaration%ENDCOLOR%
   | constant_declaration
   %GREEN%[remaining items unchanged]%ENDCOLOR%

%RED%record_element_list ::=
  %ORANGE%<i>record_element_</i>%ENDCOLOR%simple_name { , %ORANGE%<i>record_element_</i>%ENDCOLOR%simple_name }%ENDCOLOR%

%RED%record_mode_view_indication ::=
    <b>view</b> %ORANGE%<i>mode_view_</i>%ENDCOLOR%name [ <b>of</b> %ORANGE%<i>unresolved_record_</i>%ENDCOLOR%subtype_indication ]%ENDCOLOR%

%RED%simple_mode_indication ::=
    [ mode ] subtype_indication [ <b>bus</b> ] [ := %ORANGE%<i>static_</i>%ENDCOLOR%expression ]%ENDCOLOR%
</pre>


---+++ Annex I Glossary
---++++ Edit 45a.26
%GREEN%[Add definition of mode view declaration in alphabetic order on page 572]%ENDCOLOR% %BR%
%RED%<b></b>mode view declaration:</b>
A declaration of the modes, of the individual elements, of a composite interface object. 
A mode view is associated with a composite type or subtype. 
There may be more than one mode view associated with a given composite type or subtype. (6.5.2, 6.5.6.3)%BLACK%'

</sticky>

<br /><br />

---++ Comments

%COMMENT%
</noautolink>
Topic revision: r1 - 2017-07-23 - 18:48:08 - TWikiGuest
P1076