RE: [vhdl-200x] Call for Vote on WG Policies & Procedures

Thanks Peter. In my haste to move forward, I missed the template aspects. These changes are fine.

-Steve Bailey

> Steve and colleagues,
>
> The model WG procedures have a few template placeholders that
> need to be filled in. I've taken the liberty of doing so,
> including drafting some words describing the scope of the WG.
> Please see attached document. May I suggest that we vote on
> adopting these procedures, instantiated from the model procedures.
>
> If that is acceptable, I vote "approve".
>
> Cheers,
>
> PA
> (as a VASG member)
>
> --
> Dr. Peter J. Ashenden peter@ashenden.com.au
> Ashenden Designs Pty. Ltd. www.ashenden.com.au
> PO Box 640 Ph: +61 8 8339 7532
> Stirling, SA 5152 Fax: +61 8 8339 2616
> Australia Mobile: +61 414 70 9106
>
>
> > -----Original Message-----
> > From: owner-vhdl-200x@eda.org
> > [mailto:owner-vhdl-200x@eda.org] On Behalf Of Bailey, Stephen
> > Sent: Friday, 18 June 2004 04:14
> > To: vhdl-200x@eda.org
> > Subject: [vhdl-200x] Call for Vote on WG Policies & Procedures
> >
> >
> > I had previously pointed to the DASC model WG policies and
> procedures
> > and opened discussion on their suitability for adoption as the 1076
> > (VHDL-200x) working group's P&Ps. To date, there has been no
> > discussion on this topic. Therefore, I will presume a
> motion to adopt
> > the DASC model WG P&Ps.
> >
> > Please note that, according to the P&Ps, voting membership requires
> > participation and, working on the assumption that this vote
> will pass,
> > I will begin documenting participation with this
> vote. (See section > 4.7.1 of the CS SAB P&Ps
> http://www.computer.org/standards/ORIENT/p%26ptoc.htm
> <http://www.computer.org/standards/ORIENT/p%26ptoc.htm> as
> referenced in section 4.1 of the model WG P&Ps.)
>
> The WG Roster at
> http://www.eda-twiki.org/vhdl-200x/1076_wg_roster_summary.htm
> <http://www.eda-twiki.org/vhdl-200x/1076_wg_roster_summary.htm> is
> accurate with one exception (John Aynsley is now a voting
> member) which should be fixed on the web page later today.
>
> Suspense date for submitting a vote is Friday, 2 July 2004.
> The motion being put to a vote of the WG:
>
> Shall the P1076 (VHDL-200x) working group adopt the DASC
> model WG Policies and Procedures as the P&Ps of the working group?
>
> ____ Approve (comments are optional)
>
> ____ Disapprove (explanation, please)
>
> ____ Abstain
>
> ------------
> Stephen Bailey
> ModelSim Verification TME
> Mentor Graphics
> sbailey@model.com
> 303-775-1655 (mobile, preferred)
> 720-494-1202 (office)
> www.model.com <www.model.com>
>
Received on Fri Jun 18 06:20:15 2004