RE: [vhdl-200x] Call for Vote: VHDL + VHPI (P1076c) - 060908

From: Victor Berman <vberman_at_.....>
Date: Wed Aug 30 2006 - 09:16:16 PDT
Jim,

I vote to approve this proposal.

 Regards,
  Victor 

-----Original Message-----
From: owner-vhdl-200x@eda.org [mailto:owner-vhdl-200x@eda.org] On Behalf
Of Jim Lewis
Sent: Friday, August 25, 2006 8:14 AM
To: vhdl-200x@eda.org
Subject: [vhdl-200x] Call for Vote: VHDL + VHPI (P1076c) - 060908

Dear colleagues,
This is a call for vote from IEEE P1076 WG members on the Accellera
approved revision of VHDL that includes VHPI plus some ISAC revisions.
The purpose of this revision is to make VHPI available as a standard.
As such, it does not have the additional revisions that were just
completed by the Accellera VHDL TC.  Those revisions will be put forth
later
(Q1 2007?).  This gives industry some time to tune up the revisions if
necessary before they become an IEEE standard.

This revision has been reviewed and approved by both the Accellera VHDL
TC and the Accellera board.  It has also been updated slightly.  We have
a separate PAR for this work (P1076c).

The updated VHDL-VHPI draft for the P1076C can be found at:

http://www.eda-stds.org/vasg/P1076-2006/P1076c-2006-D3.1.zip

This copy of the draft is provide for members of the working group to
evaluate the draft for its suitability for balloting.  It is password
protected.  In a previous email I sent the password to all who have
voted in the last 3 votes.

Please forward votes to me by email (eg, by replying to this message) by
5pm US-PDT, Friday September 8, 2006.

Approval in this case shall mean that we accept this revision to be the
revision to send to IEEE for balloting.

Potential votes:  Approve, Negative with comment, Negative with no
comment, Abstain

Vote:

Comment:


Best Regards,
Jim Lewis
VASG/ IEEE 1076 WG Chair

P.S.
The ballot group formation will close today at
11:59 p.m. Eastern Time.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Lewis
Director of Training             mailto:Jim@SynthWorks.com
SynthWorks Design Inc.           http://www.SynthWorks.com
1-503-590-4787

Expert VHDL Training for Hardware Design and Verification
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Received on Wed Aug 30 09:16:20 2006

This archive was generated by hypermail 2.1.8 : Wed Aug 30 2006 - 09:17:41 PDT