Re: [vhdl-200x] CFV: Call for Vote on Operating Procedures for P1076 Working Group

Hi John,
Please go to the twiki site referenced below and log
your vote.

Thanks,
Jim

> I vote to approve.
>
> Regards, John
>
> -----Original Message-----
> From: owner-vhdl-200x@eda.org [mailto:owner-vhdl-200x@eda.org] On Behalf
> Of Jim Lewis
> Sent: Thursday, July 28, 2011 1:35 PM
> To: vhdl-200x@eda.org
> Subject: [vhdl-200x] CFV: Call for Vote on Operating Procedures for
> P1076 Working Group
>
> Dear colleagues,
> This is a call for vote on, the amended Operating Procedures
> for P1076 Working Group.
>
> At the July 28, 2011 meeting it was decided to propose that
> the working group policies be changed so that the officer
> positions are as inclusive as allowed by IEEE rules. The
> intent is to encourage participation in the officer positions.
> This means requiring only the chair to be an IEEE and IEEE-SA
> member. In addition, a DASC membership requirement was added
> to the chair.
>
> Only one sentence changed. Section 6.1, 1st paragraph, last
> sentence, is now:
> The chair shall be an IEEE member, individual IEEE-SA
> member, and DASC member.
>
> was previously:
> All officers shall be IEEE members and individual
> IEEE-SA members.
>
> To vote, please go to:
> http://www.eda-twiki.org/cgi-bin/view.cgi/P1076/VoteAug10
>
> Please vote before 5pm US-PDT on Wednesday 10 August, 2011.
> Please double check and make sure your vote was recorded.
>
> Best Regards,
> Jim Lewis
> P1076 Working Group Chair

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Lewis
Director of Training             mailto:Jim@SynthWorks.com
SynthWorks Design Inc.           http://www.SynthWorks.com
1-503-590-4787
Expert VHDL Training for Hardware Design and Verification
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.