[vhdl-200x] Make sure to vote today... Call for Vote: VHDL + VHPI (P1076c) - 060908

Dear colleagues,
Reminder, please make sure to vote.

Best Regards,
Jim

-------- Original Message --------
Subject: [vhdl-200x] Call for Vote:  VHDL + VHPI (P1076c)  - 060908
Date: Fri, 25 Aug 2006 08:14:22 -0700
From: Jim Lewis <jim@synthworks.com>
To: vhdl-200x@server.eda.org

Dear colleagues,
This is a call for vote from IEEE P1076 WG members on the
Accellera approved revision of VHDL that includes VHPI plus
some ISAC revisions.  The purpose of this revision is to make
VHPI available as a standard.  As such, it does not have
the additional revisions that were just completed by the
Accellera VHDL TC.  Those revisions will be put forth later
(Q1 2007?).  This gives industry some time to tune up the
revisions if necessary before they become an IEEE standard.

This revision has been reviewed and approved by both the
Accellera VHDL TC and the Accellera board.  It has also been
updated slightly.  We have a separate PAR for this work (P1076c).

The updated VHDL-VHPI draft for the P1076C can be found at:

http://www.eda-stds.org/vasg/P1076-2006/P1076c-2006-D3.1.zip

This copy of the draft is provide for members of the
working group to evaluate the draft for its suitability
for balloting.  It is password protected.  In a previous
email I sent the password to all who have voted in the
last 3 votes.

Please forward votes to me by email (eg, by replying to
this message) by 5pm US-PDT, Friday September 8, 2006.

Approval in this case shall mean that we accept this revision
to be the revision to send to IEEE for balloting.

Potential votes:  Approve, Negative with comment, Negative with no comment, Abstain

Vote:

Comment:


Best Regards,
Jim Lewis
VASG/ IEEE 1076 WG Chair

P.S.
The ballot group formation will close today at
11:59 p.m. Eastern Time.
-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Lewis
Director of Training             mailto:Jim@SynthWorks.com
SynthWorks Design Inc.           http://www.SynthWorks.com
1-503-590-4787

Expert VHDL Training for Hardware Design and Verification
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~






-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Lewis
Director of Training             mailto:Jim@SynthWorks.com
SynthWorks Design Inc.           http://www.SynthWorks.com
1-503-590-4787

Expert VHDL Training for Hardware Design and Verification
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~