RE: [sv-dc] RE: new version 19 for 3398 proposal.

I agree with Shalom's comment about IEEE style for the formatting of notes.
Notes in the IEEE standard are "informational" and not a requirement that
must be followed. Is that the intent of this note? An informational note
would work here if the requirement for the default value is stated elsewhere
in the standard and this note is just a reminder about that, but then a
cross reference to that other location would be helpful.

Stu
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Stuart Sutherland

Sutherland HDL, Inc.

stuart@sutherland-hdl.com

503-692-0898
www.sutherland-hdl.com

From: owner-sv-dc@eda.org [mailto:owner-sv-dc@eda.org] On Behalf Of
Bresticker, Shalom
Sent: Tuesday, August 30, 2011 2:25 AM
To: Steven Sharp; sv-dc@eda.org
Subject: [sv-dc] RE: new version 19 for 3398 proposal.

I think Francoise's sentence would cover that.

Note that the question would also be, I think, for a structure that contains
a member of type logic (bit or vector).

In order to pass IEEE inspection, it would be easier if written as a
separate paragraph, as:

"NOTE--."

Shalom

From: Steven Sharp [mailto:sharp@cadence.com]
Sent: Tuesday, August 30, 2011 5:30 AM
To: Francoise Martinolle; Little Scott-B11206; Bresticker, Shalom;
sv-dc@eda.org
Subject: RE: new version 19 for 3398 proposal.

I think Shalom wanted it pointed out that it is x even if it is undriven, if
it has no resolution function.

From: owner-sv-dc@eda.org [mailto:owner-sv-dc@eda.org] On Behalf Of
Francoise Martinolle
Sent: Monday, August 29, 2011 9:17 PM
To: Little Scott-B11206; Bresticker, Shalom; sv-dc@eda.org
Subject: [sv-dc] RE: new version 19 for 3398 proposal.

I removed the duplication.

At the end of the paragraph describing initialization of nets, I added the
following note:

Note that the default value for a logic net of a user-defined nettype is x.

Is that sufficient?

Francoise

        '

  _____

From: Little Scott-B11206 [mailto:B11206@freescale.com]
Sent: Monday, August 29, 2011 9:08 AM
To: Francoise Martinolle; Bresticker, Shalom; sv-dc@eda.org
Subject: RE: new version 19 for 3398 proposal.

Hi Francoise:

v20 still has two change sets for 7.2.2 (bottom of pg. 5 and top of pg. 6)
where the first one is correct and the second is old and incorrect.

Was anything added to clarify the differences in initial values between a
net and a net of a user-define nettype whose type is a single logic bit?

Thanks,

Scott

From: owner-sv-dc@eda.org [mailto:owner-sv-dc@eda.org] On Behalf Of
Francoise Martinolle
Sent: Sunday, August 28, 2011 3:11 PM
To: Bresticker, Shalom; sv-dc@eda.org
Subject: [sv-dc] RE: new version 19 for 3398 proposal.

Thanks Shalom,

I uploaded version 20 which corrects these.

Francoise

       '

  _____

From: Bresticker, Shalom [mailto:shalom.bresticker@intel.com]
Sent: Sunday, August 28, 2011 5:57 AM
To: Francoise Martinolle; sv-dc@eda.org
Subject: RE: new version 19 for 3398 proposal.

Minor editorial comments:

1. 6.6: "There are different kinds of net types: built-in or
user-defined."
Add "two" before "different". I don't usually like adding numbers, but here
I think it is better.

2. In net_declaration syntax, "delay_control" should be blue, not bolded.

3. In 28.12, delete "(Resolution of nets with user-defined nettypes)."
That is not the name of subclause 6.6.7.

4. In the change to net_port_type syntax at the end of the document, the
FROM part should be black, not blue. In both FROM and TO, there should be a
blank, not an underscore, before "data_type_or_implicit".

Regards,

Shalom

---------------------------------------------------------------------
Intel Israel (74) Limited

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.

-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 
-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.