RE: [P1800] RE: IEEE P1800-2012 SystemVerilog LRM Draft 5 (Ballot Version) Uploaded to mentor.ieee.org

Except that the description of the page field says,

"This field requires numeric input - use integers only. No roman numerals or alpha characters will be accepted by the system."

The last time around, there were was some confusion.

Shalom

From: Brophy, Dennis [mailto:dennis_brophy@mentor.com]
Sent: Sunday, February 19, 2012 7:18 PM
To: Bresticker, Shalom; ieee1800@eda.org
Subject: RE: [P1800] RE: IEEE P1800-2012 SystemVerilog LRM Draft 5 (Ballot Version) Uploaded to mentor.ieee.org

Shalom,

   The page number is that which is displayed on the page, not that shown by the computer program you select to read the pdf with. The front mater is numbered with Roman numerals: i, ii, iii, ... xxxvi, as you point out. When supplying comments, the number shown on the page should be used.

-Dennis

From: owner-ieee1800@eda.org<mailto:owner-ieee1800@eda.org> [mailto:owner-ieee1800@eda.org]<mailto:[mailto:owner-ieee1800@eda.org]> On Behalf Of Bresticker, Shalom
Sent: Sunday, February 19, 2012 4:56 AM
To: IEEE P1800 Working Group (ieee1800@eda.org<mailto:ieee1800@eda.org>)
Subject: [P1800] RE: IEEE P1800-2012 SystemVerilog LRM Draft 5 (Ballot Version) Uploaded to mentor.ieee.org

Hi,

I looked at the ballot and comment submission page.

The submission form requests page numbers for comments.

There are two page numbers for each page: the number printed at the bottom of the page and the page number of the PDF file. The latter is 36 more than the former. We should specify the numbering system to be used.

Most people use the first system. However, that has the disadvantage that you cannot specify the page number of front matter in the page field, which only accepts regular integers, not Roman numbers.

Shalom

From: owner-ieee1800@eda.org<mailto:owner-ieee1800@eda.org> [mailto:owner-ieee1800@eda.org]<mailto:[mailto:owner-ieee1800@eda.org]> On Behalf Of Brophy, Dennis
Sent: Friday, February 17, 2012 12:55 AM
To: IEEE P1800 Working Group
Cc: sv-ac@eda.org<mailto:sv-ac@eda.org>; sv-bc@eda.org<mailto:sv-bc@eda.org>; sv-cc@eda.org<mailto:sv-cc@eda.org>; sv-ec@eda.org<mailto:sv-ec@eda.org>; sv-dc@eda.org<mailto:sv-dc@eda.org>; sv-fc@eda.org<mailto:sv-fc@eda.org>
Subject: [P1800] IEEE P1800-2012 SystemVerilog LRM Draft 5 (Ballot Version) Uploaded to mentor.ieee.org

All,

  For those registered to access the P1800 document repository at mentor.ieee.org, the Ballot draft has been uploaded to the site. You can find it at https://mentor.ieee.org/1800/dcn/12/1800-12-0002-00-DRFT-ieee-p1800-systemverilog-d5.pdf. This draft contains the small editorial changes the Working Group required before it could be released to the ballot pool.

  Ballot comments will be based on a review of this draft.

Regards,

Dennis

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.