More than that, 3.1a was always intended to be temporary, something intermediate until the IEEE version. At least, that is how I understood it. Shalom ________________________________ From: owner-ieee1800@server.eda.org [mailto:owner-ieee1800@server.eda.org] On Behalf Of Rich, Dave Sent: Friday, July 10, 2009 5:49 PM To: Havlicek John-R8AAAU; Brophy, Dennis Cc: Lynn Horobin; ieee1800@server.eda.org Subject: RE: [P1800] SV 3.1a download on Accellera home page I didn't mean it should be inaccessible, just less accessible. We still get a lot of support questions with people referencing the SV3.1a standard, without even realizing it is over 5 years old. I see someone (Lynn I suppose) has already updated the link to point to the IEEE. The SV 3.0/3.1/3.1a LRMs are still available on the SV technical committee page. Dave ________________________________ From: Havlicek John-R8AAAU [mailto:john.havlicek@freescale.com] Sent: Thursday, July 09, 2009 9:46 PM To: Brophy, Dennis Cc: Lynn Horobin; ieee1800@eda.org; Rich, Dave Subject: RE: [P1800] SV 3.1a download on Accellera home page Hi Dennis: I strongly concur. For reserach purposes, it is important not to erase the history of these standards. There is also no problem with giving pointers to the more recent revisions that have occurred. Best regards, John Havlicek ________________________________ From: owner-ieee1800@eda.org [mailto:owner-ieee1800@eda.org] On Behalf Of Brophy, Dennis Sent: Thursday, July 09, 2009 11:26 PM To: Havlicek John-R8AAAU; Rich, Dave Cc: Lynn Horobin; ieee1800@eda.org Subject: RE: [P1800] SV 3.1a download on Accellera home page Accellera retained copyright to SV 3.1a and licensed it to the IEEE as the basis of 1800. We can still do with it as we please. In terms of reference, I would support keeping it in place just as the IEEE does with all its works on a particular standard AND I would suggest we also put a link to the IEEE store for the most current version of the standard as offered by the IEEE. -Dennis ________________________________ From: owner-ieee1800@server.eda.org [mailto:owner-ieee1800@server.eda.org] On Behalf Of Havlicek John-R8AAAU Sent: Thursday, July 09, 2009 8:52 PM To: Rich, Dave Cc: Lynn Horobin; Havlicek John-R8AAAU; ieee1800@server.eda.org Subject: RE: [P1800] SV 3.1a download on Accellera home page Hi Dave: I'm confused. Is this change required because of terms of the Accellera donation to IEEE? Accellera SV 3.1a still exists and is referenced in the academic literature. Do the terms of the donation require that the Accellera document be made unaccessible? This is not a research-friendly policy. Best regards, John Havlicek ________________________________ From: owner-ieee1800@eda.org [mailto:owner-ieee1800@eda.org] On Behalf Of Rich, Dave Sent: Thursday, July 09, 2009 4:11 PM To: ieee1800@eda.org Cc: Lynn Horobin Subject: [P1800] SV 3.1a download on Accellera home page Hi, I just noticed that there is a LRM link http://www.eda-twiki.org/sv/SystemVerilog_3.1a.pdf on the Accellera home page. This should be removed and replaced with a link to the IEEE store. Dave -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.Received on Fri Jul 10 07:56:54 2009
This archive was generated by hypermail 2.1.8 : Fri Jul 10 2009 - 07:56:55 PDT