RE: Dec 14th Meeting 58 Minutes Posted

I don't see anything in the documentation that restricts it as you suggest. For example:-

connect() - Language-Neutral Binding

External binding of TLM ports in a lnaguage-neutral way shall be supported by the simulation environment. The port method connect() is provided for this purpose. Use connect() when you want to bind two ports which are not both defined in the same language. For example, you can use this method to bind a SystemC<http://www.eda-twiki.org/cgi-bin/edit.cgi/P1647/SystemC?topicparent=P1647.TlmPorts> port to a SystemVerilog<http://www.eda-twiki.org/cgi-bin/edit.cgi/P1647/SystemVerilog?topicparent=P1647.TlmPorts> port from e. For uniformity, connect() may be used to procedurally bind together e ports as well.


Thus the support would already appear to be there.

Cheers,

Darren

________________________________
From: owner-ieee1647@server.eda.org [mailto:owner-ieee1647@server.eda.org] On Behalf Of JL Gray
Sent: Wednesday, December 23, 2009 5:54 PM
To: Brett Lammers
Cc: ieee1647@eda.org
Subject: Re: Dec 14th Meeting 58 Minutes Posted

I have a question about TLM ports. Will it be possible to connect from a TLM port in e to one in SystemVerilog? The documentation on the Twiki only discusses connecting to SystemC. The VMM 1.2 now supports TLM 2.0 - it would be interesting to see if it was possible to communicate between e and the VMM using a TLM transport interface.

Thanks,

JL

On Wed, Dec 23, 2009 at 10:27 AM, Brett Lammers <brettl@cadence.com<mailto:brettl@cadence.com>> wrote:

Hello All,

The minutes of meeting 58 of the IEEE 1647 e Language Working Group are posted on the website (http://www.eda-twiki.org/cgi-bin/view.cgi/P1647/Meeting58Minutes). Please review these for accuracy and forward any corrections or additions to me (brettl_ f rom _cadence.com<mailto:brettl_ f rom _cadence.com>).

Also, please review the attendance record (http://www.eda-twiki.org/twiki/pub/P1647/WebHome/ieee1647_online_roster.xls) for this meeting to verify that your attendance was recorded. If not, mail a message to ieee1647_ f rom _eda.org<mailto:ieee1647_ f rom _eda.org> containing rollcall in the subject line.

The next meeting is scheduled for Feb 8th at 9:00am PST (1700 UTC). NOTE: We are skipping the January meeting but would like to have the remaining drafts ready for the February meeting

Thank you and Happy Holidays!!

Brett Lammers



--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.